Anyone try the autozone add a leafs?

[Blazepet7]

I bought the kit from autozone and tried to install them this weekend, the way they tell you to put them on is 2 u bolts as close as possible to the axle on both sides. the way the mount that is under the stock leafs is on a slant and will not let you grab the nuts (haha, no not those nuts) also the bottom leaf the flat one will not let me go flush with the 3 other leafs please any help will do should i scratch the autozone leafs and go for the pro comps, i have read on this site that they were good to use but im in a bind..

thanks in advance, and i did search for about 2 hours my eyes are shot from staring ant the screen..

 

[Donner]

Check this out... good luck!

http://www.explorerforum.com/forums/showthread.php?t=157117&highlight=autozone+add+leaf

 

[5.0]

Did you buy an add-a-leaf or a helper spring? Got any pics of what you bought?

 

[Blazepet7]

Donner: i know in the title it says autozone add a leafs but i read all the posts that whole thread is about shackles from autozone.

5.0: there leaf spring helpers they were the ones that resembled the real add a leafs the most the only difference is they arent exactly a full curve it flattens out on the ends it says that it will lift the truck if i raise the truck off the ground 6 inches above the point i want it raised, the rear is sagging so even if i got 2 inches it would basically even the truck out with the TT.

 

[Donner]

No problem, it was just info about the components.