Auto Tranny install tips

[sirhk100]

Well I dropped the tranny last weekend and dropped it off yesterday. Should be getting it back this next friday and will put it in next weekend. It came out easy (except for 2 exhaust bolts). Hoping it'll go back in just as easy. I wanted to ask, anything not obvious to look out for while installing? Haw do you line up the torque convertors holes with the flex plate?

Khris

 

[X-1]

tranny

Put the first hole for converter on the ring gear on the bottom, and install first bolt hand tight, from there rotate ring gear by hand to next bolt, and so on. After you have started all bolts go back around and tighten. It's easier to start all first, so you can shift around alittle.