Bulldog Install Finished Except For

[donaldbc]

I have the Remote Starter Bulldog RS85 installed and working properly except for two things:
1. I can't get the factory remote to work
2. I can't figure out the 775 Relay for the parking lights to flash.
Anyone have any input?
Thanks
Once I have these things figure out I am going to post a how to thread. I took pictures all along the way and post a write up with it.

 

[Blee1099]

Hook up the pink/yellow wire located in the drivers kick panel to the blue wire off the remote start module.. Then program the remote by pressing the brake and pushing the start key on the Bulldog remote for 6 seconds or until it clicks then push the right button.. The locks will cycle..

 

[donaldbc]

what about the 775 relay?

 

[Blee1099]

Originally posted by donaldbc
what about the 775 relay?

Don't need it unless you feel like hooking up the lights too..

 

[donaldbc]

since I bought it I would like to hook up the lights, do you know which wires go where on the 775?
Thanks

 

[Blee1099]

Originally posted by donaldbc
since I bought it I would like to hook up the lights, do you know which wires go where on the 775?
Thanks

sorry don't know.. I haven't done that yet.. I'm happy with it just starting..