Bump Stop Studs??????

[Makahveli]

I just bought a 6" Skyjacker Suspension lift and unaware of where parts and pieces go. But I'm going to try to be brave and install it all by myself. I became lost when I came across the 2 bump stop stud looking things. What are they for and where do they go? Sorry I recieved the kit but no instructions. Thanx!

 

[Makahveli]

I know somebody out there knows. All the threads Ise on the Skyjacker lifts and all,,,,,,I just wann know wher they go. I was given two of em. So are they in the front or back

 

[Positive Vibes]

I'm pretty sure they are the same for a '94. I never installed my bumpstops. You should have a bump stop now made of rubber. It is mounted on the frame right above the rear axle. Should be right above the spring perch you should see a rubber bump stop cant miss it if your tires are off. Hope this helps???

 

[Hermz]

This could not take any longer than it has! So I returned those brake lines, and call 4wheelparts.com and there computers are down, so instead of getting my car done I have to wait another week for the brake lines. I got one rivet head off but I couldn't get it out. Should I grind all 4? I just have a grinder and I dont know if I can do it with just that tool, running out of time. How hard is the rest of the kit after the rivets? Thanks

 

[Hermz]

.