Hammer1
Active Member
- Joined
- February 14, 2005
- Messages
- 55
- Reaction score
- 0
- City, State
- Tucson AZ
- Year, Model & Trim Level
- 1997 XLT
Nearly done with my a4ld to c5 swap. One thing that I did not pay attention to was the in and out on the c5 for the trans fluid lines. Which hole is which in regards to fluid in and fluid out? One hole is closer to the front/bellhousing and the other hole is towards the rear/tail. Front one vague chart I found, it appears the front hole is the fluid out to the radiator and the rear hole is the in from the cooler/radiator. Which one is which for sure???