coolpool
New Member
- Joined
- August 6, 2003
- Messages
- 1
- Reaction score
- 0
- City, State
- Coolpool, Alberta
- Year, Model & Trim Level
- 94 XLT 4x4
I recently had the Cam Posn Sensor replaced, clearing the CEL for it, after great pain from the dealership forgetting to order the parts prior to my appointment 3 times, then ordering the wrong part, and insisting on charging me for the code reading when I provided them the code. Anyways, since that visit, less then a week later I had another CEL this time code 327. EGR valve cct below min volt. I thought this might be related to the work they did. Perhaps forgetting to do a connector up, but the book I have does not show where the connector should be, and the light only comes on after about 2 mins of driving.
Is this an indication of the valve being bad, a vacuum line off, or worse? What actually sets this code? The valve, or another sensor?
Please help, I know if I take it back to the dealership, they will rack up the charges again, even if it was there own fault.
Is this an indication of the valve being bad, a vacuum line off, or worse? What actually sets this code? The valve, or another sensor?
Please help, I know if I take it back to the dealership, they will rack up the charges again, even if it was there own fault.
