Center Console Replacement?

[Cole94]

'94 Explorer XLT

The center console insert (with the cupholders and coin insert) is breaking up little by little... anyone know where to get a replacement?

Color: Factory TAN (would use black but that's pretty much it.)

Design/model doesn't matter so long as it fits.

 

[ExploreHudson]

I used plastic weld to glue it back together. Mine was also missing a lot of pieces, so I also used it to add back material. I need to smooth sand and paint it, but it at least supports my arm now without cracking further. Eventually ill just snap off the entire top arm rest and put a padded cover on the lower one and over the hole instead.

 

[Cole94]

I used plastic weld to glue it back together. Mine was also missing a lot of pieces, so I also used it to add back material. I need to smooth sand and paint it, but it at least supports my arm now without cracking further. Eventually ill just snap off the entire top arm rest and put a padded cover on the lower one and over the hole instead.

Yeah, I've been gluing it, just want to replace it now...

_____________________________________

Looks like this:

Just the insert in the front. I keep looking, but I can't find one.

wouldn't mind this one:



Just cant freaking find them.

 

[Brian1]

Very common to find if you have a local junkyard you can walk through. Look in similar year Rangers too as they are usually the same. Also on ebay, here is one I quickly found that looks good - Ford Ranger Explorer Factory Center Console Cup Holder OEM Cupholder | eBay

 

[Centaurious]

An easy armrest tip especially if you don't access the storage a lot is to put a spray paint can top under the armrest. Holds it at the right height, supports your weight so you don't break the hinge if you shift position and doesn't scratch up the storage lid.

 

[roscoe 0202]

that ranger console goes clear to the front like you have a 60-40 seat same as my mazda b4000
roscoe