clicking from front wheel

[megadeth]

Ok i had this prob every now and then so i figured it was the hubs. I just put on mile marker hubs and also replaced tc motor everything was great then rolling thru a parking lot tonight and there is was again. I t stopped after i turned out of lot. Anyone got any idea what. This could be thanks

 

[kona_mtb]

It could be the wheel bearings if you havent checked already. Also, is it for sure from the front wheel or could it be coming from below the drivers feet. I had this problem and the sound was tricking me on where it was coming from. Anyways that turned out to be the radius arm bushings

 

[1AJeremyD]

Does the ticking increase as the speed increases? is it at a constant pace or is it sporadic?

 

[megadeth]

Wheel bearing replaced a year ago And it just does it at low speeds and comes and goes . New tie rods and all steering pump. Gear box hoses

 

[bcbid]

Mine makes a clicking sound now and then when I'm turning. I think it's the front u joints. They look pretty bad. They are on the TO DO LIST.

 

[1AJeremyD]

Is it with the wheel turned or is it going straight or both?

 

[bcbid]

On mine it's when the wheels are turned.

 

[1AJeremyD]

I would say U-joints as well if its with the wheel turned.

 

[bcbid]

When I looked at them you could see the cups were pulling away from the joint. The first time it made a loud clunk while I was turning. I thought for sure I broke something.

 

[bcbid]

bad u joint...

Megadeth...This is my u-joint on the drivers side front wheel. Might be worth checking out.

 

[llamaking122]

i had a click but its from my rotor being warped and hitting the pad. the pad is loose so it does it until i hit the brakes

 

[megadeth]

Front u jounts are new going to replace front pads tomorrow and check it out. Could be the u joints on front axel couldn't it.

 

[mussey ex]

Could be worn ball joints, could be a missing anti rattle clip for the brake pads?

 

[RockcrawlerEX]

First thing I would've checked is ball joints.

 

[93explorerWA]

i too am having a clicking sound when in 4x4 coming from front end. It happens when only going foward, and it does it straight and turned....

ball joints have been replaced year ago, u joints 3 months ago, wheel bearings 6 months ago, and hub bearings replaced too....

My fronts arent hooking up while in 4x4... any suggestions would help cuz im running out of ideas. thanks

Brad