Squirrels
Member
- Joined
- January 27, 2011
- Messages
- 23
- Reaction score
- 0
- City, State
- Rhode Island
- Year, Model & Trim Level
- 02 XLT
The other night, while driving at highway speeds in the rain, my 97 XLT must have slipped/hydroplaned. The controltrac system kicked in and put me in 4WD. Fine and dandy.But, isn't it supposed to disengage once slipping is not detected anymore??? I have tried, while in park, switching to 4high, then back to auto, and while in neutral, going as far as 4lo back to 4high then 4auto. Nothing. Truck is still in 4wd (hard binding while turning). There are no lights flashing, and if I switch to 4low, I can hear a slight noise followed by a click. This happened to me once before, I disconnected the battery for about 10 minutes, reconnected started it up, put it in drive, and after a slight hesitation and a bit of a "clunk", the truck was back in 4Auto (2wd).
Will the Brown Wire Mod correct this issue? Or is there an actuator on the transfercase that may be stuck?
-Jay
Will the Brown Wire Mod correct this issue? Or is there an actuator on the transfercase that may be stuck?
-Jay