Copperhead Shackles........

[93240sx]

i just ordered copperhead shackles and i called and left a message and i got a call back i asked him to make sure the holes were 14 mm he said not a problem he will make sure he said they would be sent out Tuesday (tomorrow) so i will post pics when i do the install

 

[jlsparky7]

Thanks. I would love to know if they fixed the problem. Turns out they also need to be 1/2-1/2 inch wider. I had the bend the sides to get them to fit around the bushings.

 

[93240sx]

thanks for the heads up how did u go about bending them out i was guna use a longer bolt with 2 nuts and washers on the inside and spread it apart lemme know how u did it at least i wont have to drill the holes too

 

[93240sx]

well i finally received my shackles yesterday these things are beefy as hell just need to paint them and there going on. also gotta get longer bolts for the torsion bars so i can level it out right away so i dont have to ride around with the back jacked up. anything i should specifically tell the shop that does the alignment after i do everything? thanks alot tried not to ask 1000 questions because i know all the info is on here but if anyone has any tips feel free. i will be sure to take before and after shots also if anyone cares