Flaexplorer
New Member
- Joined
- March 23, 2010
- Messages
- 1
- Reaction score
- 0
This is my first post but I have found this site to be very very helpful! I have a 99' ford explorer sport thanks to the step by step guide on here I just finished my ball joints and control arms.with the jack stand method and a BFH it took less than 3 hours for both sides,anyway on to my next issue I used the search and tried every method and can't solve a few problems.....
1st The door ajar light stays on I used very liberal amounts of Wd40 on all 5 latches and nothing it's still on..I disconnected the rear door glass switch and it's still on?..with the rear hatch open the lights no longer come on either. I get a chime on both passenger and driver doors when they are opened is there a way to bypass the switches or a way to test to find out which switch it is?
aside from that my rear wiper dosen't work and my front wipers work but don't pump out any washer fluid?
sorry for the lengthy post and thank you for all the help.
1st The door ajar light stays on I used very liberal amounts of Wd40 on all 5 latches and nothing it's still on..I disconnected the rear door glass switch and it's still on?..with the rear hatch open the lights no longer come on either. I get a chime on both passenger and driver doors when they are opened is there a way to bypass the switches or a way to test to find out which switch it is?
aside from that my rear wiper dosen't work and my front wipers work but don't pump out any washer fluid?
sorry for the lengthy post and thank you for all the help.
