- Joined
- January 20, 2000
- Messages
- 976
- Reaction score
- 5
- City, State
- McKinney, TX
- Year, Model & Trim Level
- 76 Bronco
I have promissed to pass on all the information I gather on my project.
I have a nice crate motor and a new Tranny.
I have no bolts for anything that mounts to the block.
Bellhousing bolts.
Motor mount Bolts.
Lower Intake bolts.
Water pump bolts.
Harmonic Balancer bolts.
Lower Pully bolts.
Header Bolts.
Starter Bolts.
I can not get these at NAPA,Autozone, or my local Hardware dist. Ford has some but not all, and that bill was $90.00 bucks.
So whoever goes next, make sure you get all the periphial bolts if possable.
Good Luck.
I have a nice crate motor and a new Tranny.
I have no bolts for anything that mounts to the block.
Bellhousing bolts.
Motor mount Bolts.
Lower Intake bolts.
Water pump bolts.
Harmonic Balancer bolts.
Lower Pully bolts.
Header Bolts.
Starter Bolts.
I can not get these at NAPA,Autozone, or my local Hardware dist. Ford has some but not all, and that bill was $90.00 bucks.
So whoever goes next, make sure you get all the periphial bolts if possable.
Good Luck.
