Cruise control | Ford Explorer Forums

  • Register Today It's free!

Cruise control

rocco123

Well-Known Member
Joined
February 24, 2002
Messages
872
Reaction score
12
City, State
Endicott, NY
Year, Model & Trim Level
1994 XLT & 2002 Limited
Cruise control inop

Anyone know where the cruise control computer is located for a '94? Traced the wire harness to a larger one under the dash L side. I get no response from the cruise control. I have verified vac lines are good, disassembled and checked the servo for the throttle..diaphragm & vac solenoids work. Fuse good.
Not much info in the Hanes manual. Want to check the switches without pullin the steering wheel apart.
Any common fixes for this?
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





The module is probably mounted above the glove box. A small, rectangular box with one bracket that might also be bolted to the glove box latch. Mine was an aqua-green color; I understand some might be a different color.
 






Thanks for the help. I just found it and was about to cancel the thread. I found a good wiring guid on the web also. I should be able to troubleshoot it from here.
 






It ended up being the computer (cruise control amplifier). Found this out after verifying everything else was good VIA the computer connector. Replaced the computer, ops check good, returned to service :thumbsup:
 






Cruise control diagram

Any chance you could share the site where you found the cruise control diagram? It surely would be helpful to the rest of the group. Thanks.
 












Featured Content

Back
Top