stonerhino
Active Member
- Joined
- November 10, 2014
- Messages
- 57
- Reaction score
- 0
- City, State
- Virginia
- Year, Model & Trim Level
- 2004 Explorer v6 XLT
Looking to rebuild my D4 8.8 with LSD, however the only thing I can find an abundance of is 3.73's without Limited Slip.
I went on LKQ's used parts store and all they have listed are ones with "Roll Stabilizer Control". I'm assuming these were yanked off of the V8's? I can still use these so long as I get the 3.73?
Reason why I'm looking swap and rebuild is I have this horrid moan (30-50Hz) at 52mph. It goes away until 60mph and then the thing shakes up a storm. Wheel bearings replaced (all four although I suspect one is defective).
I went on LKQ's used parts store and all they have listed are ones with "Roll Stabilizer Control". I'm assuming these were yanked off of the V8's? I can still use these so long as I get the 3.73?
Reason why I'm looking swap and rebuild is I have this horrid moan (30-50Hz) at 52mph. It goes away until 60mph and then the thing shakes up a storm. Wheel bearings replaced (all four although I suspect one is defective).