Do I still need the conversion kit? Automatic to Manual Locking Hubs

[BroncoIIAddict]

Hi, I am converting my automatic locking hubs to manual locking hubs on my1990 Ford Bronco II with the Dana 28 TTB front axle. I already got the hubs off of a junkyard 1984 Ford Ranger. If I just take all of the hub washers, spindles, lock nuts etc. from the Ranger will it still be necessary to buy a conversion kit? Or will the parts off of the Ranger serve as the conversion kit? Thanks everyone

 

[Maniak]

The manual "conversion kit" is just the 2 nuts and the washer looking thing. So, if you grab everything that is holding the out bearing on, then you will have everything you need.

~Mark