Don't be afraid to tackle this

[Thomas Mackin]

Thanks to Bigrondo I did my blend door on my 02 XLT. Takes some time but not a difficult job. You will need all the tools and I would recommend the 8mm rachet too. Even had my wife clean the counsel. I did not have to cut the dash either. You have to move from side to side to get a view or the best angle. I would start all three screws before tighting them on instilation. Also my local dealer came down on price when I told him what I could order it for. Thanks Bigrondo for the great post!!

 

[BigRondo]

Glad I could help out.

For those looking in, here is the write-up for replacing the Blend Door Actuator:

http://www.explorerforum.com/forums/showthread.php?t=294140