Jim Rowley
New Member
- Joined
- October 28, 2006
- Messages
- 2
- Reaction score
- 0
- City, State
- Colorado Springs, CO
- Year, Model & Trim Level
- 94 XLT
I picked up a 94 XLT and it had a few problems. One of them was the 4WD function. With the help of this forum (I was lurking for a while), I managed to pinpoint the problem to the hubs. I had the autohubs and now I have manual Warn units. It was a piece of cake swapping them out, as long as you have the right tools. I picked up the hub tool from NAPA for $20 and I had three different torque wrenches to do the job properly.
Thanks to Matt's write-up
, I now have 4WD again. I could have cleaned the auto hubs but with so many people suggesting to ditch them and get the manual ones. So I did.
Looking forward to reading more tech tips and explore the forum.
Jim.
Thanks to Matt's write-up
, I now have 4WD again. I could have cleaned the auto hubs but with so many people suggesting to ditch them and get the manual ones. So I did.Looking forward to reading more tech tips and explore the forum.
Jim.
