Fog Light Modification Question?

[Dan M "Wise87"]

Well I have completed the modification to my 2000 Ford Explorer Limited so the fog lights will come on with the park lights, low beam and high beams. I found the thread here in the forum and it worked like a champ.

What I want to know is, has anyone had any problems with there X since doing this modification. I just want to be sure I don't blow any relays or fuses.

Dan

 

[NC-X]

I made the same modification a little more than a month ago and haven't had a single problem. I don't think you need to worry about anything.

 

[Dan M "Wise87"]

Thanks for the info. Did you tap off the brown wire for the park lights? I took my time doing the mod. I cut open all the sleves and ran the wire. The longest part was re-taping. If the dealer was to look inside, he would never know a mod was done.

 

[NC-X]

It didn't occur to me to cut and retape the sleeve to run the wire inside. I may have to do that sometime later if I have some time. Mine has a separate wire running from the relay to the parking light power wire.

 

[Ex95XLT]

id like to do this...wheres the thread explaining it? i hate when my fog lights go off with my highs.

 

[NC-X]

Here ya go... http://www.explorerforum.com/forums/showthread.php?threadid=31137

I have some pictures of how to do it as well, but i don't have anyway to post them. Email me and I'll be glad to send them to ya.

 

[Dan M "Wise87"]

Look here. Just remember you want to add the 12in wire to the DB/LG wire coming off the relay. I found out the hard way. When I want to use my fogs, I just have to turn on my park lights. Now they work in all positions.

Dead Link Removed