For those with a BL, TT, and 33's I need a favor

[freezingbelow]

What I need is some front fender heights. Measurements from 3 or 4 different vehicles would be great so I can average them out.

Problem is when I got my truck the bars were already cranked some because of the worn out t bars.

I have new t bars waiting to go in and im looking for a good heaight to set them at.

Any help would be appreciated.

Thanks

 

[MidnightRebel07]

Mine at the center of the front wheelwells were at 40". I'm not sure you can really go by mine because I had rock sliders, rear steel bumper with swingout tire carrier and front highly modified ARB winch bumper with a 12k lb. Bandlands winch and offroad lights mounted so I had a lot of weight on it. It's a rough range though. LOL. Sorry I can't go out and measure for you now because I've already got the Solid Axle and 37" tires on it so mine is sitting abit higher then most of you guys now.

 

[01STrunner]

Not exactly what you are looking for, but when I had that lift with 35s I was right at 39.75" and 40" on the fronts (measured from the ground to the center of the wheel well).