runderwo
Well-Known Member
- Joined
- August 4, 2009
- Messages
- 141
- Reaction score
- 3
- City, State
- Tulsa, OK
- Year, Model & Trim Level
- 91 XL
I'm trying to get a list of parts needed for a front end rebuild together. I have read the very helpful guides on doing the wheel bearings and the spindle bearing/balljoints/U-joints.
I have already done:
2 sets of Inner and outer tie rods (Moog)
2 Swaybar bushings (Moog)
2 Upper ball joints (Moog)
2 Lower ball joints (Moog)
2 Inner Spindle Seals (National)
I have been picking up the following parts on sale:
2 sets of Inner and outer #37 wheel bearings (NAPA) (4 total bearings)
2 rotor wheel bearing seals (NAPA)
2 rotors with races (UBP)
brake pad set (Wagner Thermoquiet)
brake hardware kit
anti-rattle springs
2 sets of 2ea. Radius arm bushings
2 Axle pivot bushings
2 adjustable camber/caster bushing or washer kits
I still need the following parts (suggestions for best brands welcome):
2 spindle bearings Timken B2110 type
3 front axle U-joints
2 front driveshaft U-joints
Anything else I missed please add to my shopping list.
I have already done:
2 sets of Inner and outer tie rods (Moog)
2 Swaybar bushings (Moog)
2 Upper ball joints (Moog)
2 Lower ball joints (Moog)
2 Inner Spindle Seals (National)
I have been picking up the following parts on sale:
2 sets of Inner and outer #37 wheel bearings (NAPA) (4 total bearings)
2 rotor wheel bearing seals (NAPA)
2 rotors with races (UBP)
brake pad set (Wagner Thermoquiet)
brake hardware kit
anti-rattle springs
2 sets of 2ea. Radius arm bushings
2 Axle pivot bushings
2 adjustable camber/caster bushing or washer kits
I still need the following parts (suggestions for best brands welcome):
2 spindle bearings Timken B2110 type
3 front axle U-joints
2 front driveshaft U-joints
Anything else I missed please add to my shopping list.