EMBPilot
Member
- Joined
- November 29, 2006
- Messages
- 42
- Reaction score
- 0
- City, State
- Jersey Shore
- Year, Model & Trim Level
- 2007 Ranger 4x4 XLT 4.0L
This does not apply to my explorer but i wanted to throw this out there for opinions since i havent been able to dig up data on the internet.
The application is in an older late 80s hobby carm of mine, the fuel pressure at the rail is about 37PSI.
Do you guys think that those Fuel Injection Hose Clamps you see in auto parts stores are suitable to be used under those conditions for attaching rubber high temp FI hoses to rail/adapter ect?
ive searched everywhere and cant find any site that will state up to what PSI its safe to use the FI hose clamps up to.
thoughts?
The application is in an older late 80s hobby carm of mine, the fuel pressure at the rail is about 37PSI.
Do you guys think that those Fuel Injection Hose Clamps you see in auto parts stores are suitable to be used under those conditions for attaching rubber high temp FI hoses to rail/adapter ect?
ive searched everywhere and cant find any site that will state up to what PSI its safe to use the FI hose clamps up to.
thoughts?
