glue that will work on dash panel ??

[bigcrunch]

I thought I had seen it all, my replacment 97 the PO broke the light switch mounts off the panel. Stands are still attached to the switch I thought screws came loose why the switch was floating around. I'll look in the local junkyards for a replacement before someone suggest it, but slim chance of finding one intact and same color.

thanks,,,,

 

[koda2000]

i've had good luck using JB Weld on stuff like that. you mix the 2 parts together secure the part in place with some masking tape and apply the JB Weld to the reverse side. it's a little runny until it hardens, but once it does it's like steel.

 

[aelli614]

+1 for JB weld