DenCon
New Member
- Joined
- August 3, 2010
- Messages
- 2
- Reaction score
- 0
- City, State
- Cle Elum
- Year, Model & Trim Level
- 1985 Bronco II
I'm in Cle Elum, my son got a local '85 BII pretty cheap.
Got it home, started cleanout.
We knew the seats were wrong and installed poorly, pulled the seats/carpeting and discovered the driver's side pan is cracked so badly that I had to ground the Bronco for safety
We ordered a new pan from LMC will try to weld/bond with panel adhesive.
Passenger side has a smaller mess; we'll just weld the cracks up there.
Runs, but in open loop mode (this is going to be fun!).
We're going to stay stock for now (no Duraspark, etc) and try to solve the open loop problem ourselves.
Still, my son is excited about it. He did get to drive it for about a week and got some rad wheeling in before being grounded.
Gonna have to get used to driving long distance for parts...
Got it home, started cleanout.
We knew the seats were wrong and installed poorly, pulled the seats/carpeting and discovered the driver's side pan is cracked so badly that I had to ground the Bronco for safety
We ordered a new pan from LMC will try to weld/bond with panel adhesive.
Passenger side has a smaller mess; we'll just weld the cracks up there.
Runs, but in open loop mode (this is going to be fun!).
We're going to stay stock for now (no Duraspark, etc) and try to solve the open loop problem ourselves.
Still, my son is excited about it. He did get to drive it for about a week and got some rad wheeling in before being grounded.
Gonna have to get used to driving long distance for parts...
