JFlorida
New Member
- Joined
- November 23, 2009
- Messages
- 6
- Reaction score
- 0
- City, State
- Florida
- Year, Model & Trim Level
- 1995 Ford Explorer EB
I check both head lamps and they were blown out. Here is how it went down:
Headlamps
I started by checking and replacing the passenger side bulb. It had shown a blown out filament. When I replaced it with a new bulb, the driver's side lamp came back on, but the passenger side (the one I changed) remained out. I decided to drive for a while with one headlight that way. Today, the driver's side was out too. I re-checked the passenger side bulb, it is still good, no broken filament. I then checked the driver's side bulb, it had a broken filament. I replaced the driver's side bulb, and now, neither side operates. I can still use the brights, however, by using the stick. I can't get anything but the yellow lights to work using the knob on the left dashboard.
Fuses
I also checked what were the 4 and 8 (left and right lamp) fuses in the side panel. Both looked good, but I replaced one with the provided replacement anyway. After that, still no lights on either side.
What should I try next? Is there anything else that could be simple maintenance?
Headlamps
I started by checking and replacing the passenger side bulb. It had shown a blown out filament. When I replaced it with a new bulb, the driver's side lamp came back on, but the passenger side (the one I changed) remained out. I decided to drive for a while with one headlight that way. Today, the driver's side was out too. I re-checked the passenger side bulb, it is still good, no broken filament. I then checked the driver's side bulb, it had a broken filament. I replaced the driver's side bulb, and now, neither side operates. I can still use the brights, however, by using the stick. I can't get anything but the yellow lights to work using the knob on the left dashboard.
Fuses
I also checked what were the 4 and 8 (left and right lamp) fuses in the side panel. Both looked good, but I replaced one with the provided replacement anyway. After that, still no lights on either side.
What should I try next? Is there anything else that could be simple maintenance?