Help - Low and high beams INOP - But flash to pass still works

[masospaghetti]

Parking and interior lights still work - but low and high beams are out.

However, holding the turn signal stalk back (for flash to pass) makes the high beams come on.

Am I looking at a bad multifunction switch or headlight switch (or something else)? Does the flash-to-pass feature bypass the headlamp switch? Thanks all, 98 XLT.

 

[FIND]

That's a pretty common failure for the multifunction switch. Replace it and you should be good to go.

 

[tenny]

absolutley combo switch, (multifunction)....

 

[masospaghetti]

Surgery was performed today. Replaced multifunction switch and to my surprise, lights still did not work. A new headlight switch did the trick.

Thanks for the responses.

 

[FIND]

I'm very sorry that I steered you wrong there.

 

[masospaghetti]

No problem! I plan on keeping this vehicle forever and I know that multifunction switch fails often anyway.