Help me please

[FordRacer28]

i am pulling my tranny and the alignment plug on the drivers side wont come out it is stuck in there really good and i bent a solid steel pry bar so i dont kno where to go to next and i have evrything undone any advice on how to get it out...

 

[swetrid]

Is it stuck on the dowel? You can try rocking the trans side to side or up and down without knocking it off the jack. Try spraying some wd40 in there also.

 

[FIND]

are you sure you got all 6 bolts out?

 

[FordRacer28]

everything is unbolted all the bolts the lines the linkage but the tranny just wont slide off the dowel all the way

 

[FIND]

you have the torque converter unbolted? there should be enough room as long as EVERYTHING is unbolted to rock the transmission a bit. I've had transmissions stuck on dowels before all the time. Basically, you rock it for a little while, eventually it comes loose. Never fails. Careful, it is a little heavy, might want to use a transmission jack.