How to change front shocks

[dogfish246]

Hey guys,

This is my newest video that will show you how to change out front shocks. Hopefully this helps people with changing their shocks!

https://www.youtube.com/watch?v=E6dEXhEGoU8



Let me know what you think!
**Also, if the video was helpful, give it a “thumbs up” on YouTube (it helps me out, thanks)***

 

[chefduane]

Nice video, clear and concise. But you might want to add some disclaimers up front such as "Be sure to chock and block your tires before beginning work, and be sure to wear appropriate safety equipment such as safety glasses, etc..." And you might mention jack points.
I've done instructional videos and its important to add your CYA disclaimers at the start.
Good Job!
Chef Duane

 

[shadowless127]

That looks way easier then I thought it would be. I may actually give this a shot to save me some $$.

 

[bill06447]

I can't recall the last time I used a wrench to remove that top stud nut. SawzAll my first choice, if there's a hose or line in back that might get hit by the blade I drag out my handy dandy Northern Tool nut splitter. http://www.northerntool.com/images/product/700x700/909/9094281_700x700.jpg

Bill

 

[bluestream1]

I can't recall the last time I used a wrench to remove that top stud nut. SawzAll my first choice, if there's a hose or line in back that might get hit by the blade I drag out my handy dandy Northern Tool nut splitter. http://www.northerntool.com/images/product/700x700/909/9094281_700x700.jpg

Bill

I just tighten the bolt, they snap off real fast...

Or, use a cutting torch.

 

[koda2000]

I just tighten the bolt, they snap off real fast...

^ this.