How to replace the tail light in a 98 explorer?

[rwsouth]

I need to replace the tail light on my 98 explorer. Cna someone offer advice on how to do it?

 

[PRS]

Just unscrew the 4 screws holding the whole tail-light assembly to the truck. Then its just a simple quarter turn to the left and the bulb and wire will pop out, replace the bulb and reverse the process. Simple 5 min job

 

['97 V8]

actually its only two screws.

 

[stup]

actually its only two screws.

2 screws, and a kind of ball stud that fits into a socket, when you remove the screws, you just grab the tail lamp and pull straight out to release the assembly from the car.

 

[techboj]

scroll down roughly halfway through the page and it shows some pictures and basic instructions on removal of the tail light and bulb replacement

http://www.autozone.com/servlet/UiB..._us/0900823d/80/0b/a7/a4/0900823d800ba7a4.jsp

 

[MONMIX]

its so easy a cave man could do it