is it the same for 2wd and 4wd?

[shorty_2low]

howdy.

i have a 94 4x4 explorer and im going to convert it to 2wd so i was wanting to know if the cross member that the radius arms bolts to and the brackets the i-beams hang off of are the same for the 4wd and 2wd?
dos any one know for a fact?

 

[Crankcase]

Try sending a private message to Kris Guilbeaux (sp). He did a 2wd to 4wd conversion on his Navaho.

 

[Isles4evr]

The i beams are not the same. I converted mine from 2wd to 4wd and I needed the 4wd divers side (for the pass side ibeam) brackett. If you need parts for your conversion let me know. I still have the whole front suspension sitting here. Also, if you have any questions just let me know...

Chris

 

[Dan Whitaker]

Just Curious, why would you want to convert from 4x4 to 2wd? You might be better off selling the 4x4 and buy a 2wd.

 

[shorty_2low]

well every on says something like that, selling my 4x4 for a 2wd ...well there very very thin where i live so thats not going to happen!
what is that your saying Isles4evr? is it that you need both brackets for the left and right side? or just the right side.... i couldnt under stand what you was saying!