2000XPLORERSPORT
Well-Known Member
- Joined
- January 16, 2007
- Messages
- 610
- Reaction score
- 1
- Location
- michigan
- City, State
- lambertville,mi.
- Year, Model & Trim Level
- 2000 FORD EXPLORER SPORT
2000 sport,4.0l ohv,115,000
recharge a/c (fix leak wherever its leaking)
replace ball joints on driver side
get an alignment
squealing when i start the truck,then goes away.but has started squealing on and off more often.not sure what it is? im thinking cam position sensor.....
get airbag light to go off.( i know its that plug under the driver seat.it got cut somehow,i spliced the wires back into the plug,but they got pulled out.haven't got around to replacing the plug)
get the front bumper straightned out.( awhile ago i wiped out and spun around into a guard rail and the front corner of my truck hit it.)broke my hadlight/parking lights,pushed the front bumper back into the front driver side wheel.i pulled the bumper back out by hand as much as i could.but the bracket that holds that corner part of the bumper came loose,or bent.its not really noticable,but you can tell because the plastics bumper cover pops up in the middle a little bit from the bumper being bent.
thats what i can think of as of now.....
recharge a/c (fix leak wherever its leaking)
replace ball joints on driver side
get an alignment
squealing when i start the truck,then goes away.but has started squealing on and off more often.not sure what it is? im thinking cam position sensor.....
get airbag light to go off.( i know its that plug under the driver seat.it got cut somehow,i spliced the wires back into the plug,but they got pulled out.haven't got around to replacing the plug)
get the front bumper straightned out.( awhile ago i wiped out and spun around into a guard rail and the front corner of my truck hit it.)broke my hadlight/parking lights,pushed the front bumper back into the front driver side wheel.i pulled the bumper back out by hand as much as i could.but the bracket that holds that corner part of the bumper came loose,or bent.its not really noticable,but you can tell because the plastics bumper cover pops up in the middle a little bit from the bumper being bent.
thats what i can think of as of now.....