Scott B.
Explorer Addict
- Joined
- February 15, 1999
- Messages
- 2,713
- Reaction score
- 33
- City, State
- GA
- Year, Model & Trim Level
- '93 Ranger XLT
Oops - this price is for the live axle model. The hub models are about $225.00.
-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
Manual Hubs on an '03
- Thread starter dkchrist
- Start date
Oops - this price is for the live axle model. The hub models are about $225.00.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!.
dkchrist
Explorer Addict
- Joined
- August 13, 2006
- Messages
- 1,329
- Reaction score
- 2
- City, State
- Fayetteville, AR
- Year, Model & Trim Level
- 93 XLT 4DR
Depending on whether or not you buy new of used wheel bearing will determine how much you buy. For me it was worth getting everything, as I got wheel bearings with fewer miles than mine and it also gave me the retaining clips which I will have to see if I can find the part number for.
Also, the seal depth was determined through getting the entire assembly. But I you use the measurements from the writeup you should be ok.
If you do not get the entire assembly, you will need CV and new wheel bearings along with the small seal parts plus the retaining rings.
So far so good with the axles, I went wheeling on Saturday; however, I just locked in the PVH hubs and every thing worked great. Now I just need to get the AVMS.
pintopaul
Member
- Joined
- April 27, 2008
- Messages
- 19
- Reaction score
- 0
- City, State
- schroon lake new york
- Year, Model & Trim Level
- 2000 xlt awd
a ford dealer ship put the wrong bearing on my truck its an 03 and they put a 95 to 2000 wheel bearing on it.
- Joined
- June 17, 2004
- Messages
- 24,492
- Reaction score
- 5,092
- City, State
- Knoxville, TN
- Year, Model & Trim Level
- 98 Limited AWD 302
This is a good thread Daniel, well done.
By chance has anyone run across a rebuilder of the 95-01 4WD/AWD hubs? I need to have a spare set made, with ARP studs in the process. Installing longer studs is not really feasible with the hub assembled. I'd like to buy new hubs and pay them to use better ARP studs to begin with. Thanks,
By chance has anyone run across a rebuilder of the 95-01 4WD/AWD hubs? I need to have a spare set made, with ARP studs in the process. Installing longer studs is not really feasible with the hub assembled. I'd like to buy new hubs and pay them to use better ARP studs to begin with. Thanks,
Explorer Features
Explorer Features
