Navajo spring over

[Texastiger295]

I have a 91 Navajo will some one tell me how to do a spring over on the rear and what I will need for ther twyn I beam susp. on the front to level it after the soa.:redexp:

 

[jeremy white]

You will need to get 2 spring perches that will fit on your rear end and match up to the springs. I used perches off of a Ford Ranger 7.5 axle I had layin around. Then you have to put it all together but don't weld the perches on at this point. You must set the rear end angle to what you had before. Once this is acheived, check it again and then weld the perches up. By going this route you will need to fab up your own shock mounts. This should give you about 5.5- 6 inches of lift. It might be easier to order the Superlift SOA kit.
For the front, just order a 6" front lift for a Ranger or Explorer.