one driving light works, the other doesnt

[hokie2008]

this may be a common problem bu i have wired my KV 46 series lights just like the above sticky says....when i turn my lights on one driving light works and the other doesnt...i replaced the bulb thinking that may be the problem but it wasnt....can anyone help with this problem?? also the diagram shows a ground wire coming from the driving lights, on mine there is no ground wire coming out of my driving lights, all i have is a ground wire hooked up to the relay

 

[SkanlaxJMO]

off hand check all wirring then check it again......open up the housing because it has a ground in there and make sure it is connected.

 

[Bill Kemp]

The light itself, by being mounted to the metal of the veh. should act as the ground.
Maby rough up the metal where its mounted so there is some bare metal to act as a ground. Unless the light itself is bad, that should do it.