mallard39
New Member
- Joined
- April 20, 2009
- Messages
- 2
- Reaction score
- 0
- Year, Model & Trim Level
- 1997 Ranger
The pedal mechanism depresses through entire range but only starts to tension cable at very end. Not enough to engage brakes. The ratchet mechanism seems to work. It was working fine and stopped working suddenly. The cable below seems intack and I can get brakes to start to engage by manually pulling cable. Almost as if cable came off a cam on pedal assembly. Or if there is some assembly in cable that came loose and lost 3" - 4" of pull. Not sure how to remove pedal assembly. I can see three (3) hex head fasteners to side wall. Could be more. My manual does not have any info on it.
Any ideas or info would be appreciated.
Any ideas or info would be appreciated.