Push pins for inner fender splash shield

[Paul Fithian]

These work great for this application.

https://www.amazon.com/dp/B0093RRSXS/ref=cm_cr_ryp_prd_ttl_sol_28

 

[koda2000]

These work great for this application.

https://www.amazon.com/dp/B0093RRSXS/ref=cm_cr_ryp_prd_ttl_sol_28

I use something similar for my inner fender splash shields. I like them because they're easier to remove and reusable. I bought mine at the auto parts store (Dorman fastener rack, 10-pack). The diameter I purchased required that I enlarge the mounting holes one drill size for a perfect fit (used my step drill).

 

[ptf18]

Wha was the Dorman number?

 

[koda2000]

Wha was the Dorman number?

I don't recall the PN. It was 5 years ago. I did post the part number way back when. You might find it on a search. I'll try.

Edit: Found it - Dorman 961-070 order the 10 pack (it will be less expensive). I used a step drill to enlarge the holes one size and the pins fit perfectly.

 

[ptf18]

Thanks. I like the idea of reusable pins. I cut off the old ones and replace them with new when I have to get under the area of the flex-liners.

 

[Paul Fithian]

You need 12 pins.

The part number I referenced contains 12 pins and fits perfectly with no drilling. Easily removed and reused.