Question about my 2000 Ranger.

[lwerry]

I have a 2000 Ranger and the battery light is on and the gauge is reading low. I have replaced the battery. I also had the alternator tested on the truck and bench tested. On the truck it was not reading, bench tested it read fine. I have checked all connections and everything seems fine. Someone mentioned a fuseable link. Where would that be. I have looked all over but have not found it. Would it also be possible for the 125A Mega fuse to be bad?

Thanks for the help...

 

[BrooklynBay]

Welcome to this forum! I've moved your thread into the Ranger section. Trace the circuit with a schematic diagram. All of the wires are color coded.

 

[lwerry]

Thanks

Thanks I have tried that and not found anything that looks bad. I'll have to give it another try

 

[Ronald Hribar]

on my 93 the battery cable corroded inside the clamp
on my 07 the clamp is different.
anyway check voltage in cable themselves

 

[lwerry]

Thanks. I have cleaned those. Still not the problem. I guess it has to be a broken wire somewhere. Thanks for the help.

 

[Ronald Hribar]

my cable was broke INSIDE of clamp, it looked good from the outside, but when I tested for continuity from the wire to the battery clamp there was little. Again your clamp may be different from my 93

 

[lwerry]

Thanks for that info. I will have to check that. Certainly worth a try.