Impact9
Member
- Joined
- June 26, 2011
- Messages
- 32
- Reaction score
- 0
- City, State
- Wichita, KS
- Year, Model & Trim Level
- 2000 XLT AWD
The right rear glass hinge stripped out and I could no longer keep the glass side of the hinge secure so I drilled the hole slightly larger and threaded it to 1/4"x20 then the door side stripped and I repeated it again on that side. Now the left side is getting bad and I'll be doing that side as well. I never use the lift glass so I'm thinking about ditching the hinges and just welding up some brackets to hold the glass solidly in place.
Before I reinvent the wheel has anyone done this yet?
Before I reinvent the wheel has anyone done this yet?