Removed shift motor, now need alternative shifter!

[plcrew]

I got tired of messing with the junk shift motor and just took it off. Now I'm having a hard time finding the manual shifter gizmo that you just bolt in place of the shift motor. Some guy developed this wonderful device for about 55.00$ that you can buy from his website that I found somewhere on this forum. Can anybody help me? Thank you in advance.

 

[briwayjones]

Here's the gizmo you're talking about I believe.
http://theshiftster.com/

I found it in this thread for another manual shift product I hadn't seen before.

 

[plcrew]

Thanks, thats it. I just don't have time to mess around with that stupid motor, also my transfer case will not stay in 4-hi without something to hold it in 4-hi.

 

[plcrew]

So I've got the shifster on order and was brainstorming a way to engage the transfer case from inside the cab. What I came up with was to cut a hole in the floor board and cover it with a door or plug the hole with something water tight.
So does anybody know if there is any wiring in the floor area around the transfer case were the electric motor hooks to the tc.