replaced gaskets and more problems

[snowbrules3]

my intake manifold gaskets went bad so i replaced them this past weekend and i also cleaned my throttle body,maf,and iac. It started and ran and idled great. I drove the explorer for a 200 mile trip and when i arived i shut her down, i cam back out about 10 mins later and when i started it it immediatly died after it started up. Started again and the same thing. I started it a 3rd time and reved it up and then let off and it idled fine. It is doing this every time i start it hot. Have not had a chance to let it cool and see what happens when its cool? Anybody have any advice

 

[snowbrules3]

oh yeah after i started driving again about 1/4 mile down the road the cel came on. I am going to have it checked this afternoon

 

[snowbrules3]

i checked it out and it happens that the tube from the iac to the intake tube was not in all the way,well really not in at all. Fixed it, cleared the code and im good to go

 

[shamaal]

Another satisfied customer!

Thanks for the follow up!