Bob (nuclearman)
Member
- Joined
- August 28, 2000
- Messages
- 43
- Reaction score
- 0
- City, State
- VA
- Year, Model & Trim Level
- 93 XLT
Okay everyone; time to put on your thinking caps.
(Insert picture of inverted funnel on my head here.)
Any ideas about modifying a KKM (or similiar) and attaching it to the windshield pillar? This would allow cooler outside air to enter plus enable some fording
to be accomplished without water drawn into the intake.
Of course that's where the input is needed to seal the ignition and intake systems also. Not for deep fording but
to enable use in areas otherwise not crossable because the water splashing up would short something out.
Deep fording will still be done with the Mog.
Thanks for your thoughts.
Bob
(Insert picture of inverted funnel on my head here.)
Any ideas about modifying a KKM (or similiar) and attaching it to the windshield pillar? This would allow cooler outside air to enter plus enable some fording
to be accomplished without water drawn into the intake.
Of course that's where the input is needed to seal the ignition and intake systems also. Not for deep fording but
to enable use in areas otherwise not crossable because the water splashing up would short something out.
Deep fording will still be done with the Mog.
Thanks for your thoughts.
Bob