Stall Speed

[CarFreak146]

Does anybody happen to know the stall speed from the factory on the 1st Gen Explorers' Torque Convertor? Thanks.

 

[RiverRat]

1994 4.0 EXP/RANGER:

4x2/4x4, 10 1/4" Converter 2550-2950 RPM

 

[CarFreak146]

Thank you very much

 

[Mike_H]

Originally posted by RiverRat
1994 4.0 EXP/RANGER:

4x2/4x4, 10 1/4" Converter 2550-2950 RPM

Thanks from me too

This X is the first auto I have ever owned. All my other cars have been five speeds. I had my tranny rebuilt when I bought it because it would not shift into OD. I always wonder why the engine rev'ed so high before it really started moving. Althogh I think I am not getting WOT when it is floored. I think I need to do the cable mod or something, any ideas?

 

[RiverRat]

The RangePloder is the first automatic I have owned too. It will be interesting how an auto holds up to my driving

I haven't done the cable mod so I don't know much about that. Get a stick or something and push the pedal to the floor. Then take off the intake hose and look at the TB. See if the plate is all the way open.

 

[Mike_H]

Thanks I will give it a try, I think when the engine was rebuilt they did not do the throttle cable right.