Coast
Member
- Joined
- September 28, 2001
- Messages
- 28
- Reaction score
- 0
- City, State
- East Gore, Nova Scotia
- Year, Model & Trim Level
- 91 Explorer XLT
Hey all... been here for a couple years mainly as a reader. Never had to post much beacuse most questions were already asked! Now I have a question that I couldn't find...
When I turn the wheel, I have to fight with it to get it back to center. Changed the pump, pitman arm,and steering box already. (box and pitman arm was changed 2x cause i slipped on a big rock)
Also changed ball joints, tie rods (inner and outter on both sides), tightened up my wheel bearings... i'm at a loss... any ideas?
It almost feels like my tires are tipping on an angle and steering is sloppy...
When I turn the wheel, I have to fight with it to get it back to center. Changed the pump, pitman arm,and steering box already. (box and pitman arm was changed 2x cause i slipped on a big rock)
Also changed ball joints, tie rods (inner and outter on both sides), tightened up my wheel bearings... i'm at a loss... any ideas?
It almost feels like my tires are tipping on an angle and steering is sloppy...