Sway bar disconnect installation problem.

[DocVijay]

I'm trying to install my sway bar disconnects and I've run into two problems. First, how would I install (press) the small metal bushing into the urethane bushing. I've tried lubricating it and I've tried pounding it in. Can't do it! Any tips? Also, I can't get the lower bolt out of the old sway bar arm. It's pressed into the urethane bushing and won't come out. Once again, any tips?

 

[DocVijay]

bump...

 

[ahhjaws]

I don't really know if '92's are the smae as '99, but you might find some help on my website.

Is it the rear swaybar that the blots are stuck into?

 

[DocVijay]

No, it's the link. The lower bolt is pressed into the rubber bushing and is firmly in there.

Also the metal sleeve needs to go into the bushing on the new link, which I can't do.