Theft light | Ford Explorer Forums

  • Register Today It's free!

Theft light

muhl5443

Well-Known Member
Joined
December 10, 2007
Messages
263
Reaction score
0
City, State
Minnesota
Year, Model & Trim Level
'98 XLT
so my theft ligth hasnt worked since i swapped out the factory gauges with the white gauges. well i got it to work last night. but once i put all the connectors in to the circuit board at the back of the gauge panel my theft light stays on all the time now even while im driving. did i screw up a wire somewhere or what cause now its driving me nuts that its on while im driving.\

thanks
 






ok i figured it out.
 






I've put those Sport clusters in my 95 and my 99. Both were the same Cluster...but required totally different installations. (wiring) But well worth the time and effort to figure it out.
 






the funny thing is its been in there almost a year and a half now and about 3 months ago is when i realized it wasn't working. the ciruit board was the problem i ran wires directly to the bulb then it worked. but once i plugged all the connectors in it stayed on so i put electrical tape over the metal contacts on the circuit board and all is good now.
 






Featured Content

Back
Top