Tie rod ends

[philcons]

93 E-Bauer 2 dr 4.0l stick 200K miles

I'm looking to replace all the tie rod ends to tighten up the front end a bit.

I did all the bushings and shocks last summer.


Does anybody have any recommendations on Rock Auto for the parts (pro grade only)?

 

[ricco750]

Last January I replaced my tie rod ends and ball joints with the Spicer Professional Grade parts, purchased from RockAuto. They appeared to be excellent parts, and have performed flawlessly. My front end is tight as a drum, and no more of that slight vibe at 70+MPH. I also did the radius arm bushings with Moog parts at the same time. It took me a leisurely week to do the whole job, luckily I have a heated garage. Well worth the effort.

 

[crawlin91]

Damn that would be nice. I did my entire lift and 8.8 swap in the driveway last weekend...kind of a race against the weather out here in Denver. Luckily it was rather warm. not to thread jack but whats rockauto? website?

 

[ricco750]

Damn that would be nice. I did my entire lift and 8.8 swap in the driveway last weekend...kind of a race against the weather out here in Denver. Luckily it was rather warm. not to thread jack but whats rockauto? website?

Yeah, punch it in your browser...it's a great site, and there's a standing coupon on this forum that gives you 5% off.

 

[philcons]

Thank you for the information...

Were do I find the 'standing coupon' you referred to?

 

[ricco750]

Thank you for the information...

Were do I find the 'standing coupon' you referred to?

See if this helps:

http://www.explorerforum.com/forums/showthread.php?t=221235

 

[MrQ]

Unfortunately the coupon expired on the first of this month.