Trans linkage help with PIC

[cjmedina]

I want to know how to remove this linkage from the manual control lever. do I just pry it off or is the a fastener?

I have loose linkage at the selector and trying set the linkage correctly to the lever.

It seems to be out of adjustment because it does not lock in a detent position in first gear.It feels like is has to go a little bit further.

ftp://cj136.gotdns.com/files/DSCN8176.JPG

ftp://cj136.gotdns.com/files/DSCN8177.JPG


CJ

 

[cjmedina]

WELL....how does it come off?

 

[zukman]

there is a sdjusting wheel under the steering column inside the truck. remove the steering column lower cover and you will find. hopefully it is not broken like mine you can adjust the shift lever from there

 

[cjmedina]

My problem is not that the indicator does not line up but that the lever is. I don't know if it is a stretched cable...

I have the procedure but it says to disconnect the cable from the lever but I'm not sure if it just pops off


DOES IT POP OFF?

ftp://cj136.gotdns.com/files/DSCN8176.JPG

ftp://cj136.gotdns.com/files/DSCN8177.JPG