Transmission headache!

[James95]

Hello.. I have a 95 Explorer XLT 4x4.. OD and reverse are just barely working only at a high rev. truck drives fine with OD off any ideas?? Thanks James.

 

[BrooklynBay]

Welcome to this forum! I've moved your thread into the transmission section. Did you check the fluid level? Do you have a flashing O/D light or a check engine light?

 

[James95]

Thank you for moving my thread, I'm still not sure how to work this forum yet. Fluid level seems fine and yes the o/d light was flashing at one point before I unplugged the battery. One thing I did notice is a lot of the screws were very loose on the tranny which had me thinking it was low on fluid but that doesn't seem to be the case. I was accelerating when the problem accrued. Would it be possible that something is loose on the out side of the tranny therefore the tranny isn't building pressure?

 

[BrooklynBay]

Which bolts were loose (transmission pan or the valve body)? Did you scan the PCM for codes?

 

[James95]

The pan bolts were loose and also 2 of the bolts that hold the transmission to the engine were loose and 2 big bolts on the drivers side . I have no way of scanning for codes and the light hasn't come back on.