3xowner
Well-Known Member
- Joined
- March 13, 2016
- Messages
- 119
- Reaction score
- 15
- City, State
- Western US
- Year, Model & Trim Level
- '00 Explorer EB 4SOHC RWD
Urgent! Need to find out what sensor/ pigtail wiring this is for.
2000 Eddie Bauer explorer 4.0 sohc with eatc and 2wd.
The sensor appears to be located in the middle to back of the top of the engine block. It has a bold straight down. The wiring the runs forward to behind the tstat housing, then up along the right back (passenger side), to then run along the top of the valve cover. There it secures doen to the upper radiator tube bracket and snaps into a connector which then that wiring dissappear under the intake manifold. Thanks in advance
2000 Eddie Bauer explorer 4.0 sohc with eatc and 2wd.
The sensor appears to be located in the middle to back of the top of the engine block. It has a bold straight down. The wiring the runs forward to behind the tstat housing, then up along the right back (passenger side), to then run along the top of the valve cover. There it secures doen to the upper radiator tube bracket and snaps into a connector which then that wiring dissappear under the intake manifold. Thanks in advance
