Well it looks like i may fix it

[Flashflood]

Well with this economy being as rough as it is I haven't gotten anyone to take the Limited so I've decided to park it possibly mess around in forscan and do a trannie gear ratio reset and torque converter reset if that doesn't work I may reprogram the ecu for a manual. Even with the unfortunate death rattle of the rear chain. Hears hoping.

Flash

 

[Fix4Dirt]

Well with this economy being as rough as it is I haven't gotten anyone to take the Limited so I've decided to park it possibly mess around in forscan and do a trannie gear ratio reset and torque converter reset if that doesn't work I may reprogram the ecu for a manual. Even with the unfortunate death rattle of the rear chain. Hears hoping.

Flash

so youre manual swapping it?

 

[Flashflood]

so youre manual swapping it?

Looks like it got to get a scanner to like the ecu but. Probably.

 

[Fix4Dirt]

Looks like it got to get a scanner to like the ecu but. Probably.

afaik though it will run with a manual PCM youll get codes but i thik itll run itll idle high but idk.

 

[Flashflood]

I was just going to try change in forscan.

 

[C420sailor]

I don’t think you can reflash a PCM in Forscan…?

 

[Fix4Dirt]

I don’t think you can reflash a PCM in Forscan…?

i dont think a full refresh can be done, only adjustments to certain parameters that can be done at dealer level. you'd need tuning software i think

 

[Josh P]

Look at post #5

SOHC Automatic to manual conversion swap guide

The start of the 5 speed swap. I scored this absolutely spotless 2wd 97 SOHC for $250 with a bad trans! I sold the wheels and tires the next day for $300 so I litterally started this project $50 in the positive. First step is to get the truck as high as possible safely on stands This is the...

www.explorerforum.com

 

[Flashflood]

Hmm it was there when I looked eh going over cheyenne I'll see if there any manuals over there or ill drive it until it drops (got put miles on those tires somehow) it seems to be driving a bit better with the shift patterns reset.