what kit can i use for a 2" bl on my 95 ex

[westridez]

i see lots of people using 3" ranger kits on there explorers but i only want to go 2" bL and a 2" tt and shakles for a set of 31's or 32's for some minor off roading what kit would work with or without mods? thanks

 

[dman726749]

sounds like you need to do lots of research...first you cant do a tt since you dont have any torsion bars for a 2" bl you can use the one made for the 91-94 explorers from preformance accesories..........

 

[westridez]

my explorer is a 95 and it does have torsion bars

 

[dman726749]

ah, well your profile says a 91...eitehr way you can still use the 91-94 kit for a 2" bl...

 

[CodePoet]

hahaha dustin was pwnd

yeah, you can do a tt and 2" bl, probably the most economical way to get your rig lifted aside from the kit...which will cost way more than my entire sas (minus tires possibly and a few odds an ends)

 

[westridez]

i guess i should edit that profile its been a while i used to have a 91

 

[Tilt168]

hey west, seems like we are doing pretty much the same thing other then i want to fit either 32's or 33's so i will probably go for the 3" bl, post pics as you go!

 

[westridez]

what do i have to do to fit a 2" 91-94 ex body lift into my 95?

 

[BigDave!!!]

you could probably fit 32-33's too west, i have overally about 3.5" of lift and could fit some 33s with a little bit of trimming

 

[westridez]

if i went 3" body lift and 2" tt do you think i could clear 33's

 

[dman726749]

yep...maybe a little inner fender trimming of the plastic, but minimal

 

[westridez]

if i go with the 91-94 body lift will the bumper brakets work on my 95?

 

[Blee1099]

Search the useful thread section of this forum. It will yield results.